Page Comparison

src/vos/vea/tests/vea_ut

src/eio/smd/tests/smd_ut

Look at the DAOS-1246 and include all unit tests for NVMe

daos_epoch_discard() will also create the more fragmentation. So add unit test specific to that API call.

Write/Read data (<4K) 1B/1K/4K [Random/Sequential] and make sure it does not use NVMe

Write/Read data with non standard sizes 4025,259K,1.1M,30.22M [Random/Sequential] and make sure it does not use NVMe

Write/Read data (>4K) 1M/16G [Random/Sequential] and make sure it use NVMe

Write/Read data with non standard sizes 4025,259K,1.1M,30.22M [Random/Sequential] and make sure it does not use NVMe

Write/Read data (<4K) 1B/1K/4K [Random/Sequential] and make sure it does not use NVMe

Write/Read data with non standard sizes 4025,259K,1.1M,30.22M [Random/Sequential] and make sure it does not use NVMe

Write/Read data (>4K) 1M/16G/1TB [Random/Sequential] and make sure it use NVMe

Write/Read data with non standard sizes 4025,259K,1.1M,30.22M [Random/Sequential] and make sure it does not use NVMe

Try using the offset from API or use the core Python API to modify the existing Array and read through.

The test code daos_run_io_conf.c will be doing similar thing so worth to use same.

PMDK may have some API to get the allocated but it wont be easy to use as it is. There is Pool Query which will provide in future which can be track the size to verify memory leak.

We may need fault injection layer to control the PMDK transaction with server start/stop. 

Example:

1> Create 3G pool

2> Write 1G data and before it goes for transaction commit shutdown the server.

3> Next server start it should claim the full 3G space 

Write the data on NVMe >4K

Re-write using the same array with small size ~1-2 bytes which will go through SCM.

Do this and change ~100 bytes with the different data

Do fetch which will combined the record and verify it.

Do the similar thing like writing small data set to SCM and overwrite large data to NVMe, and validate the content.

When overwriting the data will be kind of new epoch entry getting created. But it will use the old data set and update the new bytes value only.

During fetch Epoch will aggregated and provide the result with modified bytes.

Write the data on SCM <4K

Extend the data set using the same array with larger size >8K which will go through NVMe

Do this and repeat for few times with the different data

Fetch the dataset which will combined the records, Verify all the old+new records.

PMDK may have some API to get the allocated but it wont be easy to use as it is. There is Pool Query which will provide in future which can be track the size to verify memory leak.

Example:

1> Create 3G pool

2> Write 1G data and before it goes for transaction commit shutdown the server.

3> Next when server start verify it should claim the full 3G space.

We need fault injection layer to control the PMDK transaction with server start/stop. 

Create the pool with 12GB.

Add 8GB size of data on NVMe and 4G on SCM. IO has to be written with different container (~100) with different sizes.

use more smaller sizes for NVMe (4K-32K) and for SCM (8Bytes-4K) to have more fragmentation.

Fragmentation information will be needed from pool query in future to validate some test area. 

1> Create the small data set with Epoch1, 2, 3

2> Discard 3rd Epoch

3> Run single IOR to verify the performance.

Do the above steps for ~10000 times. Make sure at the end the discarded fragmentation is not creating the issue for new write and even performing up to the level for same IOR run

Use smaller sizes for NVMe (4K-32K) and for SCM (8Bytes-4K) to have more fragmentation.

• NVMe SSD discovery with "discover" bindings
• NVMe SSD burn-in with "burnin" bindings
• NVMe SSD configuration with  "configuration" bindings

• evicting SSD based on high temperature
• wear-leveling data

• SSD firmware image update